Label applicators

Bottle-Matic Label Requirements:

• Must be on 3” core
• Must have approximately an 1/8” gap between labels
• Must be in copy position 3 or 4 – Copy position 3 is recommended
• Maximum roll diameter 9”
• Label must be over 2mil thick
• Length of label must be over 1”
• For 10″ Bottle-Matic Labels can be between 1 1/2″ & 9″ wide
• For 16″ Bottle-Matic Labels can be between 2″ and 15″ wide
  Avoid clear cellophane backing paper (you can use it, but you must order your machine with the optional “Waste Rewinder” $425.00 – this material wants to cling to the machine and get tangled in rollers.

Bottle-Matic 10

For applying labels to cylindrical container up to 9” long (or longer if item has a neck)

Size: 15”x 17”x 8” (LxWxH) (Machine only- does not include label roll)
Weight: 17 lbs (Packaged weight 32 pounds)
Voltage: 115v/ 220v
Container Diameter: 1/2” to 10”*
Label Requirements: Die cut labels printed in copy position # 3 or #4.
Minimum width of backing paper should be 11/2”
Must have 1/8 gap between labels and 3” core.
Label Width: ½” to 8”
Label Length: ½” to 25”
Labeling Speed: 4 ½” plus per second
Production per Hour: 1000 pieces using a 7” long label **
Label Thickness: Most labels 4 mil or thicker, and also most Mylar, foil and acetate labels.
Max Roll Diameter: Standard: 9”, with optional Large roll adaptor 15”
Max Roll Weight: None
Actuation: Semi-automatic with foot switch and solid state controls
(push button optional – no additional charge)
Warranty: 3 year parts & labor

* Smaller diameter(less than 1.5”) or lighter weight empty plastic bottles may require the use of the pressure arm – included with machine.

** Actual production will depend on operator efficiency in placing and removing containers
to be labeled.

Bottle-Matic 16

For applying labels to cylindrical container up to 15” long (or longer if item has a neck)

Size: 21”x 17”x 8” (LxWxH) (Machine only- does not include label roll)
Weight: 28 lbs (Packaged weight 38 pounds)
Voltage: 115v/ 220v
Container Diameter: 1/2” to 6”*
Label Requirements: Die cut labels printed in copy position # 3 or #4.
Minimum width of backing paper should be 11/2”
Must have 1/8 gap between labels and 3” core.
Label Width: ½” to 15”
Label Length: ½” to 25”
Labeling Speed: 4 ½” plus per second
Production per Hour: 1000 pieces using a 7” long label **
Label Thickness: Most labels 4 mil or thicker, and also most Mylar, foil and acetate labels.
Max Roll Diameter: Standard: 9”, with optional Large roll adaptor 15”
Max Roll Weight: None
Actuation: Semi-automatic with foot switch and solid state controls
(push button optional – no additional charge)
Warranty: 3 year parts & labor

* Smaller diameter(less than 1.5”) or lighter weight empty plastic bottles may require the use of the pressure arm – included with machine.

** Actual production will depend on operator efficiency in placing and removing containers
to be labeled.

Waste-Rewinder: This option automatically rewinds the waste paper that is produced after labeling your product. Without this attached the waste paper would simple fall over the back of the machine and into a waste bin.

Auto-Matic: This labeling option allows you to just insert your bottle and the labeler automatically activates. Foot switch is still included, but not needed!